|
Morphy
|
So the question then becomes what is the terminal velocity of an arrow vs say a 4 oz lead glande. Lead I think would have a much better terminal velocity (kind of goes without saying right lol).
Then, how high are they being cast- so as to know the max speed obtained at impact and lastly, at what speed even if its lower does an arrow point inflict greater damage than a lighter, longer range sling projectile.
Now that we have chat GPT these conversations get much more interesting.
Question- if a warbow shot a 1500 grain arrow at 160 fps at an angle of 42 degrees how high would it go.
(Initially GPT gave a initial possible velocity of 180-240.) 240 for a 10 gpp arrow is impossible. 180 is highly unlikely.) so I chose 160 fps as the starting velocity.
To determine the maximum height the arrow would reach when shot at an angle of 42 degrees with an initial speed of 160 fps, we can use the principles of projectile motion.
1. Split the initial velocity into horizontal and vertical components: The vertical component is given by v₀y = v₀ * sin(θ), where θ is the launch angle (42 degrees) and v₀ is the initial speed (160 fps).
2. Calculate the time of flight (t): The time it takes for the arrow to reach its peak height and then fall back down is given by t = (2 * v₀y) / g, where g is the acceleration due to gravity (32.2 fps²).
3. Calculate the maximum height (h): The maximum height reached by the arrow can be calculated using the equation h = (v₀y)² / (2 * g).
Plugging in the values, we have:
v₀ = 160 fps θ = 42 degrees g = 32.2 fps²
Calculating the vertical component of the initial velocity: v₀y = 160 * sin(42) ≈ 103.28 fps
Calculating the time of flight: t = (2 * 103.28) / 32.2 ≈ 6.4 seconds
Calculating the maximum height: h = (103.28)² / (2 * 32.2) ≈ 167.8 feet
Therefore, under these assumptions, the arrow would reach a maximum height of approximately 167.8 feet when shot at a 42-degree angle with an initial speed of 160 fps from a 150-pound warbow.
how fast would a 1500 grain arrow be traveling if it fell in an arc from 167.8 feet?
To determine the speed at which a 1500-grain arrow would be traveling when it falls from a maximum height of 167.8 feet, we can use the principle of conservation of energy.
Assuming no air resistance, at its highest point, the arrow would only have potential energy, which would be fully converted into kinetic energy as it falls. We can equate the potential energy at the highest point to the kinetic energy at the point of impact.
The potential energy at the highest point can be calculated using the equation: PE = m * g * h where m is the mass of the arrow (converted to pounds) and g is the acceleration due to gravity (32.2 fps²), and h is the maximum height (167.8 feet).
The kinetic energy at the point of impact can be calculated using the equation: KE = (1/2) * m * v² where v is the velocity of the arrow at the point of impact.
Since the potential energy is equal to the kinetic energy (neglecting any losses), we can set up the equation: m * g * h = (1/2) * m * v²
Simplifying, we have: v² = 2 * g * h
Plugging in the values, we get:
m = 1500 grains (converted to pounds: 1500 / 7000 = 0.2143 lb) g = 32.2 fps² h = 167.8 feet
Calculating the final velocity: v² = 2 * 32.2 * 167.8 v ≈ 148.7 fps
Therefore, under these assumptions, the 1500-grain arrow would be traveling at approximately 148.7 feet per second when falling from a maximum height of 167.8 feet.
This is assuming no drag so we would have to be lowering this number somewhat since arrows have fletching.
|