Welcome, Guest. Please Login
SLINGING.ORG
 
Home Help Search Login


Pages: 1 2 
Send Topic Print
Mass producing Clay glandes ammo (Read 1714 times)
irgendeinekiwi
Tiro
**
Offline


Slinging Rocks!

Posts: 17
Mass producing Clay glandes ammo
May 15th, 2024 at 5:32am
 
It occured to me that one can express the curve of pointed clay glandes as an arc of a larger diameter circle. Following this gived a certain projectile size and/or volume, one could calculate the diameter of said larger circle and the arc length of the projectiles curve.

Based on this, one could mark and cut out said arc length from a pvc pipe of the correct internal ø and use it to shape glandes from clay balls in a precise and repeatable manner, much like Aardvark shaper, but with longer lengths one could roll multiple balls at once. By using softened wax instead of clay, blanks for the lost-wax casting of bismuth projectiles (please dont sling lead around)
For a 60g clay glande I calculated the following:
(Assuming 15% weight reduction drying air drying and a density of 1.4g/cm³)

60g+15%≈70g clay
70g/1.4g/cm³ = 50cm³

Ellipsoid volume =4/3πabc, where semiaxis a:c = 1:2.5 for a 1:2.5 curve ratio, the same for semiaxis b assuming a circular crosssection. This results in the unsimplified formula being V=4/3π0.4c×0.4c×c

Solving for c with a 50cm³ volume results in c= 4.2cm, meaning a & b both = 1.68cm. These semiaxis are then multiplied by 2 to get the final gland dimensions; 8.4cm long, ø3.36cm

Using this calculator  https://www.handymath.com/cgi-bin/arc18.cgi?convrad=cm&convarc=cm&convwid=cm&con... one can then input the values of c and a to find the arc length and diameter of the circle. For the above projectile this is an arc length of 9.27cm and diameter of 12.18cm.
This diameter correlates roughly to the internal diameter of 125x3.1mm PVC pipe with an ID of 11.9cm, the arc length reflecting how wide of a section (measured on the inner wall of the pipe) to cut out.

These formula can course be modified for other curve ratios and projectile weights and densitys. For a 1:2 curve a and b each = 0.5c, for 1:3 0.3'c etc

I intend to build this in the near future, once I get my hands on a few kgs of clay. Until then I welcome others to come up with their own versions.


Back to top
 
 
IP Logged
 
Sarosh
Interfector Viris Spurii
*****
Offline



Posts: 1180
Re: Mass producing Clay glandes ammo
Reply #1 - May 15th, 2024 at 7:52am
 
good idea on the pvc pipe channel.
I wanted to make a parallel array of channels to produce 10-20 projectiles at once. The dosage for each channel could be made by rolling clay into a long cylinder and then laying on the channels (like a pill roller) theoretically the same could be applied on concrete using a pipe to make a long concrete cylinder for the dosage.
but concrete needs compression so it didnt work. I abandoned the project because of the high prices of the 3d printed channels and clay price.
your idea might work with clay if you figure a way to make the parallel pvc channels stable.

in my case clay is expensive and it would make sense only if it was fired cheaply.

this is the first time I hear of bismuth projectiles, some people use pewter instead of lead. I personally would love some forged steel biconicals instead of lead
Back to top
 
WWW  
IP Logged
 
kairo
Tiro
**
Offline


Slinging Rocks!

Posts: 49
Germany
Gender: male
Re: Mass producing Clay glandes ammo
Reply #2 - May 15th, 2024 at 7:58am
 
Great idea, can't have enough bullets Cheesy
The shape you describe is a "tangent ogive": https://en.m.wikipedia.org/wiki/Nose_cone_design, an ellipsoid has no pointy ends if I remember correctly.
I have derived the equation for the volume of its solid of revolution and designed press molds for 3D printing. They work quite well. Maybe I find the formula somewhere
Back to top
 
 
IP Logged
 
irgendeinekiwi
Tiro
**
Offline


Slinging Rocks!

Posts: 17
Re: Mass producing Clay glandes ammo
Reply #3 - May 15th, 2024 at 9:47am
 
I'm surprised that there had been less discussion on lead alternatives (not that I have directly searched for it) given the risks and toxicity for both the processor and the environment. Bismuth has none the toxicity and a low melting point.

As for clay, a 10kg block (6€) would get me around 150 glandes at 3cent a shot. Rocks slung over field have a nasty habit of damaging mower blades... That and the consistency of clay glandes makes them a better option for me.
Back to top
 
 
IP Logged
 
Jaegoor
Interfector Viris Spurii
*****
Offline


Slinging Rocks!

Posts: 2835
Gender: male
Re: Mass producing Clay glandes ammo
Reply #4 - May 15th, 2024 at 1:26pm
 
Making clay projectiles is not difficult. I use two methods. You have to practice a method a bit, but then it is the fastest method. The other method is also very simple. You can find them in kitchen supplies. They are completely perfect shapes. Search for kibbeh maker. It costs little money. It couldn't be more perfect.
Back to top
 

Bono Mellius
 
IP Logged
 
irgendeinekiwi
Tiro
**
Offline


Slinging Rocks!

Posts: 17
Re: Mass producing Clay glandes ammo
Reply #5 - May 15th, 2024 at 1:31pm
 
A bit of help from Sketchup and chatgpt has given the attached formulas for finding the volume and length of 1:2.5 pointed glandes. Enough with the maths, time to head to the workshop... Grin

Back to top
« Last Edit: May 29th, 2024 at 9:06pm by joe_meadmaker »  
 
IP Logged
 
irgendeinekiwi
Tiro
**
Offline


Slinging Rocks!

Posts: 17
First mockup
Reply #6 - May 29th, 2024 at 9:17am
 
Using 110×3.2mm Pipe I knocked up a quick test rig.

I measured my clay as having 2.09g/cm³ density before drying. After forming and drying the the oven (20% water loss by weight) the resulting test glande weighed 60g.


Back to top
« Last Edit: May 29th, 2024 at 9:10pm by joe_meadmaker »  

20240529_151034.jpeg (216 KB | 33 )
20240529_151034.jpeg
20240529_151046.jpeg (179 KB | 32 )
20240529_151046.jpeg
20240529_151123.jpeg (322 KB | 27 )
20240529_151123.jpeg
 
IP Logged
 
IronGoober
Interfector Viris Spurii
*****
Offline


...and now, No. 1, the
larch...

Posts: 1707
California
Gender: male
Re: Mass producing Clay glandes ammo
Reply #7 - May 29th, 2024 at 8:21pm
 
That's beautiful man.

FYI, you should size your images down to about 20% of their original size to post, otherwise they show up huge.
Back to top
 

John R.
 
IP Logged
 
joe_meadmaker
Slinging.org Administrator
*****
Offline


Slinging Ice is Cool!

Posts: 3211
PA, USA
Re: Mass producing Clay glandes ammo
Reply #8 - May 29th, 2024 at 9:13pm
 
IronGoober wrote on May 29th, 2024 at 8:21pm:
FYI, you should size your images down to about 20% of their original size to post, otherwise they show up huge.

Pics resized.  We have instructions to help with this.  If you're working on a smartphone, a quick online search will likely get some instructions pretty easily.


And agree with IG.  That setup and the glande look great! Thumbs Up
Back to top
 
 
IP Logged
 
Sarosh
Interfector Viris Spurii
*****
Offline



Posts: 1180
Re: Mass producing Clay glandes ammo
Reply #9 - May 30th, 2024 at 2:01am
 
great result.
have you tried producing more than one at the same time?
Back to top
 
WWW  
IP Logged
 
irgendeinekiwi
Tiro
**
Offline


Slinging Rocks!

Posts: 17
Re: Mass producing Clay glandes ammo
Reply #10 - May 30th, 2024 at 2:03am
 
IronGoober wrote on May 29th, 2024 at 8:21pm:
That's beautiful man.

FYI, you should size your images down to about 20% of their original size to post, otherwise they show up huge.


Yeah I'm relatively pleased with the result, just figuring out the technique to it as not all of them come out that nice the first try.

Thanks for the heads up
Back to top
 
 
IP Logged
 
irgendeinekiwi
Tiro
**
Offline


Slinging Rocks!

Posts: 17
Re: Mass producing Clay glandes ammo
Reply #11 - May 30th, 2024 at 2:09am
 
Sarosh wrote on May 30th, 2024 at 2:01am:
great result.
have you tried producing more than one at the same time?


With a 1m length, up 5 at a time has worked so far
Back to top
 
 
IP Logged
 
Sarosh
Interfector Viris Spurii
*****
Offline



Posts: 1180
Re: Mass producing Clay glandes ammo
Reply #12 - May 30th, 2024 at 5:10am
 
that's awesome!
So do you think long linear is better than making shorter parallel channels?
Back to top
 
WWW  
IP Logged
 
irgendeinekiwi
Tiro
**
Offline


Slinging Rocks!

Posts: 17
Re: Mass producing Clay glandes ammo
Reply #13 - May 30th, 2024 at 8:02am
 
Sarosh wrote on May 30th, 2024 at 5:10am:
that's awesome!
So do you think long linear is better than making shorter parallel channels?


I think so. The only issue I've had so far is that occasionally two glandes may roll together and bind. With parallel channels it may be a bit cumbersome to exert equal pressure in the rolling direction. Ideally with this set up one drops in the 5 clay blobs spaced out but to side of the channel, then swipes the top roller across and the formed projectiles roll out the other side.

The limitations of my test rig so far:
- It would benefit from more rigidity (I did mount a long wooden strip on the top roller), either with the lower channel supported by frames or just expanding foam
- the cuts could definitely be more accurate or sanded down so that all edges are 100% parallel
- as the upper roller is unfixed, it does have a bit of "slop". An adapter to ensure only linear motion will be one of next upgrades.

On a side note, I recently watched your video on making concrete projectiles; kneadable concrete would most likely work with this method too. I saw a formula for it somewhere on the german internet..
Back to top
 
 
IP Logged
 
Sarosh
Interfector Viris Spurii
*****
Offline



Posts: 1180
Re: Mass producing Clay glandes ammo
Reply #14 - May 30th, 2024 at 9:30am
 
Concrete seems to like compression. I have tried with some 3d printed rollers and didnt work. maybe a different mix could work but I 'd stick with hand shaping with concrete. Pros are it is the cheapest and can be more durable than clay. Cons are it can be more messy than clay, needs gloves, requires more time to mix and get ready and you have less time to work with before it sets.

if it is easy to slide the pvc pipe as it is, you could have 5-10 parallel channels each making 5 projectiles producing 25-50 projectiles in one roll. I'd use plywood for the frame. If this is achievable that would really make me interested in clay.
Back to top
 
WWW  
IP Logged
 
Pages: 1 2 
Send Topic Print
(Moderators: Chris, vetryan15, Curious Aardvark, Kick, joe_meadmaker, Morphy, Rat Man)