Welcome, Guest. Please Login
SLINGING.ORG
 
Home Help Search Login


Pages: 1 2 
Send Topic Print
Introduction of Stabyhoun (Read 1614 times)
Stabyhoun
Tiro
**
Offline


Fetch this!

Posts: 43
Netherlands
Gender: male
Introduction of Stabyhoun
May 15th, 2024 at 4:35am
 
Well hello Slingers,

I've been interested in slinging for a couple of weeks now, and did think it was time to join this forum.

I've picked up an interest after a reddit post where someone was slinging tennis balls for their dog. I decided to try and make a sling for myself, without doing any research.
The first one was very rudimentary, made out of a bicycle inner tube, and wasn't very much of a succes.

I then had some progression as seen in the attached picture. I started with a simple loop sling from some rope I had lying around. It wasn't a big succes either, but could make some distance with it...  Roll Eyes
I guess that's where I discovered this site, and made a black seatbelt-sling-type thing with some paracord and felt.
The red/blue/black sling is where it really took of. I made it based on some post here on the forum, and it works very well. It has a nice crack to it. Unfortunately it starts to show some wear already.
The last one is the blue sling. I haven't really got the chance to test it, probably will do so this afternoon. It is a mersa-style sling, but somehow my ammo keeps falling out. Might have made a mistake in the balance/centering of the lead cords.

I live in the Netherlands, and mainly use my sling when I'm taking a walk with my dog, slinging tennisballs for her to fetch. That's also where my username came from, a Stabyhoun is a dutch breed of dogs.

Nice to meet you all, and thanks for all the available info.

Stabyhoun
Back to top
« Last Edit: May 31st, 2024 at 5:44am by Stabyhoun »  
 
IP Logged
 
TOMBELAINE
Funditor
****
Offline


Slinging Rocks!

Posts: 810
france
Gender: male
Re: Introduction of Stabyhoun
Reply #1 - May 15th, 2024 at 11:24am
 
Good beginning.
Welcome.
Back to top
 
 
IP Logged
 
Stabyhoun
Tiro
**
Offline


Fetch this!

Posts: 43
Netherlands
Gender: male
Re: Introduction of Stabyhoun
Reply #2 - May 17th, 2024 at 8:23am
 
Made a new sling yesterday. Out of jute cord. It is based off the rockman design.

The pouch holds really well. It is remarkable that it is way more silent than the paracord sling. Probably because of all the fibers sticking out.

Is there a good way to fix this? Burn it off with a flame?
Back to top
 
 
IP Logged
 
Rat Man
Slinging.org Administrator
*****
Offline


Slinging Rocks!

Posts: 13870
New Jersey, USA
Gender: male
Re: Introduction of Stabyhoun
Reply #3 - May 17th, 2024 at 8:38am
 
Welcome from New Jersey.  Your sling making is progressing quickly.
Back to top
 
 
IP Logged
 
joe_meadmaker
Slinging.org Administrator
*****
Offline


Slinging Ice is Cool!

Posts: 3202
PA, USA
Re: Introduction of Stabyhoun
Reply #4 - May 17th, 2024 at 10:54pm
 
Welcome from Pennsylvania, USA!

Stabyhoun wrote on May 17th, 2024 at 8:23am:
Burn it off with a flame?

Exactly.  If you have a lighter, it will clean it up really fast.

And nice looking slings! Thumbs Up
Back to top
 
 
IP Logged
 
IronGoober
Interfector Viris Spurii
*****
Offline


...and now, No. 1, the
larch...

Posts: 1707
California
Gender: male
Re: Introduction of Stabyhoun
Reply #5 - May 19th, 2024 at 5:52pm
 
Nice looking sling! A gas range/stove top will also do the trick, just pass the sling through the flame quickly and it will singe the little hairs off very nicely without altering the sling at all.

If you use the sling for a week or two, they will also just break off.
Back to top
 

John R.
 
IP Logged
 
Stabyhoun
Tiro
**
Offline


Fetch this!

Posts: 43
Netherlands
Gender: male
Re: Introduction of Stabyhoun
Reply #6 - May 28th, 2024 at 4:09am
 
I decided not to burn the jute sling. I kind of like the silent whoosh it gives now.

Instead I made a new sling out of some desert camo paracord.
I made a double finger loop, twisted flat braid for the retainer cord. Rockman style pouch, finished of with a cobra knot for the ends of the weave.

I've waxed it with some ski-wax I had laying around, and melted it into the fabric in the oven.

In the oven the whip cracker kind of hardened, and didn't work anymore, so I removed it, and made some new cracker cords. I'll try to give those a whirl this afternoon.


I do have a small issue with the double finger loop and the flat braid. The finger loop is kind of at an 90 degree angle in comparison to the pouch, so the cord twists a quarter turn.
Is this normal for this construction, or did I make a mistake?

I was thinking of making the next one with a 6-strand round braid, to be able to turn the finger loops, and align the pouch better.
Back to top
 
 
IP Logged
 
Rat Man
Slinging.org Administrator
*****
Offline


Slinging Rocks!

Posts: 13870
New Jersey, USA
Gender: male
Re: Introduction of Stabyhoun
Reply #7 - May 28th, 2024 at 9:07am
 
Good looking sling.
Back to top
 
 
IP Logged
 
joe_meadmaker
Slinging.org Administrator
*****
Offline


Slinging Ice is Cool!

Posts: 3202
PA, USA
Re: Introduction of Stabyhoun
Reply #8 - May 28th, 2024 at 9:37pm
 
Stabyhoun wrote on May 28th, 2024 at 4:09am:
I do have a small issue with the double finger loop and the flat braid. The finger loop is kind of at an 90 degree angle in comparison to the pouch, so the cord twists a quarter turn.
Is this normal for this construction, or did I make a mistake?

I don't know if I would call it a mistake.  Most of the double finger loop slings I've seen (and used) do have the loops and the pouch in the same orientation.  So if the pouch is laying down flat on a table, the loops are also laying down flat.  In that sense, yes, the sling you have pictured does have them at 90° to each other.  But as to which is correct, that will come down to you (how you hold and release the sling).  With your normal throw, if it seems that the sling is twisted a 1/4 turn, then you'll probably benefit from getting them lined up.

All that said, the sling does look nice.  It would actually be my preference for a double finger loop.  A double loop like that has never worked well for me.  Even after multiple 100-Rounds, I just can't get a consistent release.  So I end up just using one loop.  And when you do that, it's much better to have the loops and pouch oriented as you have them.
Back to top
 
 
IP Logged
 
IronGoober
Interfector Viris Spurii
*****
Offline


...and now, No. 1, the
larch...

Posts: 1707
California
Gender: male
Re: Introduction of Stabyhoun
Reply #9 - May 29th, 2024 at 1:19am
 
What you have with the pouch/loop orientation is best for a rifled release.  I would say it is correct.
Back to top
 

John R.
 
IP Logged
 
Stabyhoun
Tiro
**
Offline


Fetch this!

Posts: 43
Netherlands
Gender: male
Re: Introduction of Stabyhoun
Reply #10 - May 29th, 2024 at 1:24am
 
Rat Man wrote on May 28th, 2024 at 9:07am:
Good looking sling.

Thanks!

joe_meadmaker wrote on May 28th, 2024 at 9:37pm:
But as to which is correct, that will come down to you (how you hold and release the sling).  With your normal throw, if it seems that the sling is twisted a 1/4 turn, then you'll probably benefit from getting them lined up.


Yeah, That's why I was wondering if I should try a different braid next time.


joe_meadmaker wrote on May 28th, 2024 at 9:37pm:
All that said, the sling does look nice.  It would actually be my preference for a double finger loop.  A double loop like that has never worked well for me.  Even after multiple 100-Rounds, I just can't get a consistent release.  So I end up just using one loop.  And when you do that, it's much better to have the loops and pouch oriented as you have them.


I never really thought that having a single or double loop would actually effect the release. I must say that I haven't really used this sling enough to be able to tell the difference.

I've added a couple of pictures, one how the sling naturally holds. You can see the twist in de retainer cord.
While inspecting the finger loops; they have a natural tendancy to twist the cord 45 degrees. I might have to look into the braid crossing over in eachother, there might be a more square way to do that. I've just improvised this one on the go Roll Eyes
Back to top
 
 
IP Logged
 
Stabyhoun
Tiro
**
Offline


Fetch this!

Posts: 43
Netherlands
Gender: male
Re: Introduction of Stabyhoun
Reply #11 - May 31st, 2024 at 5:36am
 
Reworked the release end.
Removed the crown knot, sewed/binded a small loop made of paracord without core. Then made a tassle out of the core.

We'll see how this one cracks.
Back to top
 
 
IP Logged
 
joe_meadmaker
Slinging.org Administrator
*****
Offline


Slinging Ice is Cool!

Posts: 3202
PA, USA
Re: Introduction of Stabyhoun
Reply #12 - Jun 1st, 2024 at 12:03am
 
Stabyhoun wrote on May 29th, 2024 at 1:24am:
I never really thought that having a single or double loop would actually effect the release. I must say that I haven't really used this sling enough to be able to tell the difference.

It could just be me.  I don't actually recall hearing anyone complain about the double loop other than myself.

Most of the time a double loop is going to naturally come out at a 90° angle to the fingers.  There's not really a way to get around that.  With a single loop it can easily be held at an angle.  I attached a couple pictures to show that more clearly.  With the double finger loop I can feel it when I release and I don't like it.  And just to note, I'm not bashing the double finger loop.  There are plenty of great slingers out there who use it.  It's just not for me.
Back to top
 

TwoFingerLoop.jpg (690 KB | 26 )
TwoFingerLoop.jpg
SingleFingerLoop.jpg (723 KB | 18 )
SingleFingerLoop.jpg
 
IP Logged
 
Stabyhoun
Tiro
**
Offline


Fetch this!

Posts: 43
Netherlands
Gender: male
Re: Introduction of Stabyhoun
Reply #13 - Jun 3rd, 2024 at 9:54am
 
Thanks for the pictures, I see what you mean.

I was mainly wondering the use of a double finger loop in combination with a flat braid. I see you use round braids.

Ah, well. First got to get some more shots with this one to really tell anything about it.
Back to top
 
 
IP Logged
 
Stabyhoun
Tiro
**
Offline


Fetch this!

Posts: 43
Netherlands
Gender: male
Re: Introduction of Stabyhoun
Reply #14 - Jun 13th, 2024 at 3:18am
 
My latest creation; with a 6-strand round braid for the retention cord.
I really had a hard time with the round braid. Got lost in the pattern several times, and the braid hasn't become very even.
I rotated the pouch 90 degrees, and it seems to work very well.
Back to top
 
 
IP Logged
 
Pages: 1 2 
Send Topic Print
(Moderators: Curious Aardvark, Rat Man, Bill Skinner, David Morningstar, Masiakasaurus, Mauro Fiorentini, Chris)