Slinging.org Forum - Wood finishes.

Welcome, Guest. Please Login

Slinging.org Forum › General › Other Topics › Wood finishes.

(Moderators: Chris, David Morningstar, Mauro Fiorentini, Bill Skinner, Curious Aardvark, Masiakasaurus, Rat Man)

‹ Previous Topic | Next Topic ›

Pages: 1

Wood finishes. (Read 4369 times)

LKH9 Funditor Offline Posts: 824 Malaysia Gender:	Wood finishes. Oct 10^th, 2005 at 9:07am Why won't the varnish I applied on my slingshot harden. Its can is labeled with 'decorative pigmented varnish'.It scratches very easily.I waited for days!! What's wrong.It's quite expensive ,though.
Back to top	IP Logged

Curious Aardvark Forum Moderation Offline Taller than the average Dwarf Posts: 13965 Midlands England Gender:	Re: Wood finishes. Reply #1 - Oct 10^th, 2005 at 9:48am hmmm, should probably have gone for a tough polyurethane varnish suitable for outside application. That would dry faster, be tougher and be waterproof. Why are you varnishing a sling ?
Back to top	Do All things with Honour and Generosity: Regret Nothing, Envy None, Apologise Seldom and Bow your head to No One - works for me IP Logged

LKH9 Funditor Offline Posts: 824 Malaysia Gender:	Re: Wood finishes. Reply #2 - Oct 10^th, 2005 at 10:02am No,not sling,it's slingshot(beanflipper)
Back to top	IP Logged

Castle7 Senior Member Offline I'm on fire today!! Posts: 453 GR, Michigan Gender:	Re: Wood finishes. Reply #3 - Oct 10^th, 2005 at 6:54pm SLINGSHOT!!!! TRAITOR Just kidding, really Sorry I can't be of anyhelp. But I do think an outside varnish would be more proper.
Back to top	If I build it, they will run.&&-Mikeel&&&& IP Logged

Gun Interfector Viris Spurii Past Moderator Offline Slinging Viking Posts: 1089 The Ozarks of Ark & Mo Gender:	Re: Wood finishes. Reply #4 - Oct 10^th, 2005 at 9:17pm any wood finshes will sctrach. did you buy the right varnish for the type of wood you have?
Back to top	"A Knifeless man is a lifeless man" Old Nordic Proverb IP Logged

LKH9

Funditor

Offline

Posts: 824
Malaysia
Gender: male

Re: Wood finishes.
Reply #5 - Oct 11^th, 2005 at 7:17am

The problem is it scracthes TOO easily.A slight press with my thumb-nail will leave a deep mark.I applied it in the right way, too.It is labled 'for interior and exterior use'.

When I compare it to the varnish applied to the handles of some commercial tools like brush,hammer, they are much harder than my varnish.

I have been spending the whole month working on my slingshot.!!!!Can I apply polyurethane over the old varnish??Is urethane suitable for wood?Anyway thanks alot.

IP Logged

Curious Aardvark

Forum Moderation

Offline

Taller than the average
Dwarf

Posts: 13965
Midlands England
Gender: male

Re: Wood finishes.
Reply #6 - Oct 11^th, 2005 at 12:03pm

yep polyurethane varnish is suitable for most things - get a ship grade one if you can or just a general purpose outdoor brand. Varnishes for ships decks have to be resistant to wear and tear and salt water so will tend to be tougher than ordinary varnish.
You would probably be better cleaning the other varnish off first and allow the new tougher stuff to bind directly to the wood.
Basically any polyurethane varnish suitable for outdoor furniture should do the trick, but ships varnish if you can get it.

'decorative & pigmented' aren't words I would generally associate with a tough outdoor varnish. Go for words like: 'scratch resistant, tough, exterior grade, weather resistant etc'.
You want HARD varnish, varnish that can crack walnuts with it's biceps - that kind of thing :-) A picture of a big hammer on the tin is also a good idea :-)

What's a bean flipper ? My idea of a slingshot is a y shaped bit of wood with a big elastic band. I can't imagine varnishing one so what you've got is probably different :-)

Do All things with Honour and Generosity: Regret Nothing, Envy None, Apologise Seldom and Bow your head to No One - works for me

IP Logged

Smudge Senior Member Offline Sticks and stones WILL brake your bones. Posts: 334 everywhere Gender:	Re: Wood finishes. Reply #7 - Oct 11^th, 2005 at 3:12pm I always coat my atlatls with a polyurethane coat after they've been varnished. Forget being primitive about things, I want the piece of primitive weaponry that I worked hard on to last!
Back to top	IP Logged

LKH9

Funditor

Offline

Posts: 824
Malaysia
Gender: male

Re: Wood finishes.
Reply #8 - Oct 11^th, 2005 at 7:58pm

I use the word beanflipper because some people may get confused with the sling and the slingshot.

I want to varnish it because it took a great effort to make.The wood I use has a weakness.When it touches water,its grain will raise like hell. Undecided

Perhaps my 'masterpiece' will last forever. Grin

The varnish I used is quite beautiful.I don't want to remove it. Undecided

IP Logged

LKH9 Funditor Offline Posts: 824 Malaysia Gender:	Re: Wood finishes. Reply #9 - Oct 12^th, 2005 at 3:36am I love the golden pine colour of the pigmented varnish.The wood I use has no beautiful colour.I have to beautify it.
Back to top	IP Logged

LKH9

Funditor

Offline

Posts: 824
Malaysia
Gender: male

Re: Wood finishes.
Reply #10 - Oct 12^th, 2005 at 7:51am

I also subjected it to high temperature in my car,still it remains soft.

I also have problems in purchasing these items.The seller in the hardware doesn't know English.He said that the varnish I picked is shellac!!How come?It's labled 'varnish' on the can.

I asked him if it's hard after curing , he doesn't know!I'm sure he won't know what is stain and polyurethane. Sad

I can't get these items.

IP Logged

Curious Aardvark Forum Moderation Offline Taller than the average Dwarf Posts: 13965 Midlands England Gender:	Re: Wood finishes. Reply #11 - Oct 23^rd, 2005 at 9:41am shellac is not hard - Most of the finishis/polishes I use for wood turning are shellac based. It's fairly soft but will burnish to a good shine. Go read my previous post :-) for what you should be buying.
Back to top	Do All things with Honour and Generosity: Regret Nothing, Envy None, Apologise Seldom and Bow your head to No One - works for me IP Logged

Pages: 1

Slinging.org Forum › General › Other Topics

‹ Previous Topic | Next Topic ›

(Moderators: Chris, David Morningstar, Mauro Fiorentini, Bill Skinner, Curious Aardvark, Masiakasaurus, Rat Man)