Slinging.org Forum - Print Page

Slinging.org Forum
https://slinging.org/forum/YaBB.pl General >> Introductions >> Hi everyone! https://slinging.org/forum/YaBB.pl?num=1620274980 Message started by slingostarr on May 6^th, 2021 at 12:23am

Title: Hi everyone!
Post by slingostarr on May 6^th, 2021 at 12:23am

Hi all!

Been following the forum for a while and a number of youtube channels of members, thought I should join the community!

Been slinging since I was a kid, but only recently have been putting in effort to get good at it.

Here is a little gift for anyone with a 3D printer, it is my design to make split pouch slings. Just print it off, stick it to a piece of metal and clamp it with even pressure into some dampened veg-tan leather to get uniform split pouch slings, cut em out, dry them off and off you go.

I also have a 3D printed glandes mold you can make with plaster.

Thanks everyone, and thanks for the add!

Slingostarr.

https://www.thingiverse.com/thing:4850635

Title: Re: Hi everyone!
Post by Teg on May 6^th, 2021 at 12:39pm

Welcome aboard!
Regarding 3D printed molds CA (Curious Aardvark) might be interested. He also makes molds.

Title: Re: Hi everyone!
Post by joe_meadmaker on May 6^th, 2021 at 8:54pm

Welcome from Pennsylvania!

Title: Re: Hi everyone!
Post by Greenjay on May 6^th, 2021 at 9:42pm

Howdy from North Texas.

Title: Re: Hi everyone!
Post by Rat Man on May 6^th, 2021 at 10:52pm

Welcome to the forum!

Title: Re: Hi everyone!
Post by Kick on May 7^th, 2021 at 2:21am

Welcome from Finland!

Title: Re: Hi everyone!
Post by Mersa on May 9^th, 2021 at 8:26pm

Welcome from down under

Title: Re: Hi everyone!
Post by NooneOfConsequence on May 14^th, 2021 at 3:46pm

Howdy from South Texas!

It’s great to have another 3D printing geek around!

If you’re buying veg tan leather for Aussie style split pouch slings, I find it much easier to buy a long leather strap in the width I want and then cut pouch pieces with a half-round leather cutting tool. Your model does seem useful if you only have sheets of leather though. Nice work!

Maybe we need to start a thread with all the 3D printables in one list?

We could probably use more lists on the forum :whistle:

Title: Re: Hi everyone!
Post by Slyngorm on May 24^th, 2021 at 2:55pm

I greet you from the North