Hobb
Senior Member
  
Offline
Posts: 329
Denver, CO
Gender:
|
I don't know much about fibers, but round braiding around a core is fairly easy (if time consuming). There are some good links on the links page of this site with drawings. Basically, start with an even number of strands, half in each hand, one hand on either side of your core. Take the strand on the far right back, around and behind the core to the opposite side, then weave it under/over/under/over 'til you get it back to it's own side/hand, this time on the inside instead of the outside. Then take the strand on the far left back, around, and behind the core and do the same thing. Back to the right, back to the left, etc. I've seen pictures of softer woolen strands woven around courser, presumably stronger materials, but I've never tried it.
|